P7-3500 Firmware Update
Model: P7-U2EGA
History of previous changes: [Firmware History]
Latest Firmware: May 15, 2008 [20080515_MPT_35_00]
Updates and Changes made in this release:
- Added: ISO playback support for FAT32 formatted drives
- Added: DVD navigation function (IFO playback) for NTFS formatted drives
- Changed: GUI design for main screen
Before you upgrade the firmware, turn on your P7-3500 media player, press the
SETUP key and check the present firmware. If your current version is the same as
the latest release seen above, your unit does not need to be updated. If yours
has an older version, follow the steps described below.
WARNING: NEVER TURN OFF YOUR UNIT DURING THE FIRMWARE UPDATE
PROCEDURE. THIS MAY DAMAGE YOUR DEVICE. IF FOR ANY REASONS (E.G. POWER SUPPLY
FAILURE DURING FIRMWARE UPDATE) THE PROCEDURE FAILS, YOU MAY NOT BE ABLE TO
OPERATE YOUR DEVICE ANYMORE. IN THIS CASE PLEASE CONTACT YOUR VENDOR!
THIS FIRMWARE IS FOR INXTRON'S P7-3500 DIGITAL
MEDIA PLAYER. DO NOT USE ANY OTHER FIRMWARE FOR THE P7-3500 AND DO NOT USE THIS
FIRMWARE FOR ANY OTHER DEVICE!
1. Download the latest firmware for your P7-3500 media player, save it on
your local disk and unzip it.
2. Store the BIN file (bank30.rom) on the hard drive of your P7-3500 media
playing in the top directory.
3. Disconnect the USB cable from your computer and connect the device to your
TV.
4. Use the remote control, make sure the source is the internal hard drive
and then access it using the file browser.
5. Select YES to confirm and press the
"Play/Enter" key to start the firmware upgrade procedure.
6. During the upgrade procedure, the screen will show the words Write/Erase.
After the firmware upgrade is complete, the word Done shows quickly and then the
screen goes black.
7. Only now turn off the power to restart the device and connect it via
USB to your computer.
8. Erase the firmware (bank30.rom) on the hard drive and disconnect the
device from your computer.
9. Connect the P7-3500 media player to your TV and turn it back on; your new
firmware is now ready to use.
| 
